NSN 5305-01-507-4818
High Torque Screw
Between 0.558 inches and 0.588 inches fastener length, flat countersunk head style, between 0.280 inches and 0.337 inches head diameter, grip diameter: between 0.162 inches and 0.163 inches .
Manufacturer part number NAS2833T4PTY for national stock number 5305015074818.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-507-4818.
-
MPN or Model
NAS2833T4PTY
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.558 inches and 0.588 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.337 inches -
Grip Diameter
Between 0.162 inches and 0.163 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4971 assn standard single material response -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-361-8073 MPN NAS1746-6Conductor Splice
- 5305-00-056-3995 MPN MS21262-90Socket Head Cap Screw
- 5305-00-058-7614 MPN MS24694S134Machine Screw
- 5305-00-083-1816 MPN NAS1132V2Close Tolerance Screw
- 5305-00-097-4484 MPN MS21125-0428Close Tolerance Screw
- 5305-00-161-0676 MPN NAS1081C04A6LSetscrew
- 5305-00-177-5756 MPN MS24667-11Socket Head Cap Screw
- 5305-00-207-3737 MPN NAS517-4-14Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-507-4818 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2833T4PTY | National Aerospace Standards |