NSN 5305-01-508-9273
Panel Screw
0.750 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number 111511-001 for national stock number 5305015089273.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-508-9273.
-
MPN or Model
111511-001
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.340 inches -
Fastener Length
0.750 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
First Diameter From Head
Between 0.098 inches and 0.100 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.410 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 303se or steel comp 316 or steel comp 304l or steel comp 316l -
Material Specification
Qq-s-763 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-531-0561 MPN 40-716-428-01Insulated Terminal
- 5935-01-458-5148 MPN 712873Electrical Plug Connector
- 5930-01-472-2289 MPN 009224Rotary Switch
- 5905-00-005-4131 MPN 40-525-480-11Film Fixed Resistor
- 5935-00-956-2935 MPN 104167-301Electrical Connector Retainer
- 5935-01-125-5821 MPN 40-742-3080-00Electrical Receptacle Connector
- 4920-00-097-8842 MPN LT4030-06-01Attitude H Analyzer
- 5950-00-161-5525 MPN 149104-01Electrical Coil
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-508-9273 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
111511-001 | Ge Aviation Systems Llc |
111511-001 | Ge Aviation Systems Llc |
111511-001 | Ge Aviation Systems Llc |