NSN 5305-01-509-3755
High Torque Screw
Between 2.676 inches and 2.706 inches fastener length, flat countersunk head style, 0.449 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1154-38 for national stock number 5305015093755.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-509-3755.
-
MPN or Model
NAS1154-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.301 inches and 0.331 inches -
Fastener Length
Between 2.676 inches and 2.706 inches -
Head Style
Flat countersunk -
Head Diameter
0.449 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Rq-4a -
Thread Diameter
0.250 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6527 MPN NAS1063A20-456Terminal Board Marker Strip
- 4920-01-532-5086 MPN NAS1553-A5D-12RPMater Aircraft Knob
- 5940-01-429-9493 MPN NAS1063A13-TBN1002Terminal Board Marker Strip
- 5305-00-003-6823 MPN NAS6002U24Machine Screw
- 5305-00-007-1565 MPN NAS1100C06-8PMachine Screw
- 5305-00-008-7878 MPN NAS1190E02T10LSocket Head Cap Screw
- 5305-00-052-8903 MPN MS24630-57Tapping Screw
- 5305-00-053-1079 MPN MS35199-42Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-509-3755 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154-38 | National Aerospace Standards |