NSN 5305-01-509-6354
High Torque Screw
Between 0.735 inches and 0.765 inches fastener length, oval countersunk head style, between 0.3898 inches and 0.3948 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT4069-4D17A for national stock number 5305015096354.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-509-6354.
-
MPN or Model
HT4069-4D17A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.398 inches and 0.469 inches -
Fastener Length
Between 0.735 inches and 0.765 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.3898 inches and 0.3948 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
End Application
Landing gear -
Thread Diameter
0.250 inches -
Grip Length
Between 0.266 inches and 0.296 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.629 inches first hole and 0.639 inches first hole -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-dtl-83488, type ii class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-194-9177 MPN SC1777C08-7Machine Screw
- 5305-01-218-4547 MPN BACB30LR4U24Close Tolerance Screw
- 5305-01-264-1477 MPN LD111-0044-0717Close Tolerance Screw
- 5305-01-381-0914 MPN VT1696-6-31Close Tolerance Screw
- 5305-01-386-2556 MPN SC1779-3-9Machine Screw
- 5305-01-435-0468 MPN BACB30LU14-53YClose Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-462-2719 MPN TX1026V3-5AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-509-6354 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4069-4D17A | Arconic Global Fasteners & Rings, |
HT4069-4D17A | Sps Technologies, Llc |
HT4069-4D17A | Hi-shear Corporation |
WC4069-4D17A | West Coast Aerospace Inc |
HT4069-4D17A | Sps Technologies, Llc |
HT4069-4D17A | Lisi Aerospace Canada Corp |
3M927-4DL17 | Boeing Company, The |
11885-4DL17 | Reid Products Inc. |
3M927-4DL17 | Twist Tite Mfg, Inc |