NSN 5305-01-510-2322
High Torque Screw
Between 0.886 inches and 0.916 inches fastener length, flat fillister head style, between 0.221 inches and 0.226 inches head diameter, head height: between 0.074 inches and 0.086 inches .
Manufacturer part number NAS1121-10 for national stock number 5305015102322.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-510-2322.
-
MPN or Model
NAS1121-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.886 inches and 0.916 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.221 inches and 0.226 inches -
Head Height
Between 0.074 inches and 0.086 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Part Name Assigned By Controlling Agency
Screw -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-510-2082 MPN NAS1063A6Terminal Board Marker Strip
- 5935-01-649-0263 MPN EN6093-01VElectrical Receptacle Connector
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-052-7405 MPN MS24617-47Tapping Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
- 5305-00-108-9804 MPN NAS1351-5LE16Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-510-2322 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1121-10 | National Aerospace Standards |
NAS1121-10 | National Aerospace Standards |
NAS1121-10 | National Aerospace Standards |