NSN 5305-01-511-6733
Bolt Stove
Between 1.313 inches and 1.375 inches fastener length, flat countersunk head style, 0.653 inches head diameter, internal drive style: torque set.
Manufacturer part number NAS1102-6-22 for national stock number 5305015116733.
Datasheet
-
Product description
Machine Screw NSN 5305-01-511-6733.
-
MPN or Model
NAS1102-6-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.153 inches and 1.215 inches -
Fastener Length
Between 1.313 inches and 1.375 inches -
Head Style
Flat countersunk -
Head Diameter
0.653 inches -
Internal Drive Style
Torque set -
End Application
1520-01-355-8250 -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 4140 and steel comp 4340 and steel comp 8740 -
Screw Material Specification
Mil-s-5626 military specification 1st material response and mil-s-5000 military specification 2nd material response and mil-s-6049 military specification 3rd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-3006 MPN NAS1063B112-128Terminal Board Marker Strip
- 5940-01-470-3346 MPN NAS1063A2-107BATerminal Board Marker Strip
- 1680-01-517-0727 MPN NAS1336A5C10DAircr Swing Arm Pin
- 1680-01-563-6041 MPN NAS1714D2-16SWAircraft Loop Clamp
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-008-5853 MPN NAS1630E18PMachine Screw
- 5305-00-033-7683 MPN NAS1352C06-20Socket Head Cap Screw
- 5305-00-052-8887 MPN MS24630-24Tapping Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-511-6733 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1102-6-22 | National Aerospace Standards |