NSN 5305-01-511-6974
High Torque Screw
Between 1.205 inches and 1.235 inches fastener length, flat countersunk head style, between 0.265 inches and 0.272 inches head diameter, spline minor diameter: between 0.1105 inches and 0.1125 inches .
Manufacturer part number 3M1170D3-14A for national stock number 5305015116974.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-511-6974.
-
MPN or Model
3M1170D3-14A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 1.205 inches and 1.235 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.265 inches and 0.272 inches -
Spline Minor Diameter
Between 0.1105 inches and 0.1125 inches -
Spline Major Diameter
Between 0.1540 inches and 0.1560 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Torx -
End Application
F18 e/f -
Thread Diameter
0.190 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Bolt, 100 degree reduced head, gear drive recess-ph13-8mo (125 ksi shear), inconel 718 (125 ksi shear), 6al-4v titanium (95 ksi shear) -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-173-3597 MPN LD111-0044-2305Close Tolerance Screw
- 5305-01-336-3215 MPN VCL0008-3D4PClose Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-600-9506 MPN PMT1153V12Close Tolerance Screw
- 5306-00-205-3700 MPN ACB30NE6H18Close Tolerance Bolt
- 5306-00-607-1143 MPN VCD0020-5-D31Shear Bolt
- 5306-01-026-5104 MPN BACB30NE3-3Close Tolerance Bolt
- 5306-01-142-3551 MPN VAL23608-4-45Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-511-6974 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1170D3-14A | Boeing Company, The |
TX1027D3-14A | Sps Technologies, Llc |
TX1027D3-14A | Arconic Global Fasteners & Rings, |
TX1027D3-14A | Sps Technologies, Llc |
HP1170D3-14 | Heartland Precision Fasteners, Inc. |
TX1027D3-14A | Sps Technologies, Llc |
TX1027D3-14A | Sps Technologies, Llc |
TX1027D3-14A | Hi-shear Corporation |
11825D3-14A | Reid Products Inc. |
TX1027D3-14A | Lisi Aerospace Canada Corp |
TX1027D3-14A | Sps Technologies Inc |
10328819 | Nimikkeistokeskus Ncb Finland |
3M1170D3-14A | Valley-todeco, Inc. |
3M1170D3-14A | Saturn Fasteners Inc |
3M1170D3-14A | Heartland Precision Fasteners, Inc. |
GS1014D3-14A | B & B Specialties Inc. |
3M1170D3-14A | Fastener Innovation Technology, Inc. |
11845D3-14A | Reid Products Inc. |
TX1027D3-14A | Huck International, Inc. |
3M1170D3-14A | Houston Precision Fasteners I, Lp |
WC1170D3-14A | West Coast Aerospace Inc |
TX1027D3-14A | Alcoa Global Fasteners, Inc. |
TX1027D3-14A | Alcoa Fastening Systems |