NSN 5305-01-515-0376
High Torque Screw
4.003 inches fastener length, flat countersunk head style, offset cruciform (torque set) internal drive style, thread diameter: 0.250 inches.
Manufacturer part number NAS1154-59D for national stock number 5305015150376.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-515-0376.
-
MPN or Model
NAS1154-59D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
4.003 inches -
Head Style
Flat countersunk -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C5 galaxy acft -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, machine -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-56264 military specification single material response or mil-s-8844 military specification single material response or mil-s-6049 military specification single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4805 MPN NAS42DD8-80FCAircr Sleeve Spacer
- 5305-00-007-0216 MPN NAS1743C4T20USocket Head Cap Screw
- 5305-00-009-5709 MPN NAS1100E06-10PMachine Screw
- 5305-00-051-4508 MPN MS51974-27Setscrew
- 5305-00-057-0537 MPN NASM51958Machine Screw
- 5305-00-057-2600 MPN MS51029-52Setscrew
- 5305-00-071-2499 MPN MS24694A96Machine Screw
- 5305-00-097-8959 MPN NAS1190-06P7LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-515-0376 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154-59D | National Aerospace Standards |