NSN 5305-01-515-7920
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1580V4R22 for national stock number 5305015157920.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-515-7920.
-
MPN or Model
NAS1580V4R22
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.393 inches and 0.413 inches -
Fastener Length
Between 1.763 inches and 1.793 inches -
Head Style
Flat countersunk -
Head Diameter
0.464 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B1-b acft -
Thread Diameter
0.250 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
99.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Screw -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-425-7412 MPN NAS1063A4-462Terminal Board Marker Strip
- 5305-00-009-0517 MPN NAS1393C00-7Machine Screw
- 5305-00-053-1111 MPN MS24621-7Tapping Screw
- 5305-00-058-9389 MPN MS51977-74Setscrew
- 5305-00-079-1748 MPN MS24694S19Machine Screw
- 5305-00-079-2575 MPN NAS1100-4-7Machine Screw
- 5305-00-126-6208 MPN MS21093-0204Machine Screw
- 5305-00-209-0597 MPN NAS608C3-16Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-515-7920 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V4R22 | National Aerospace Standards |