NSN 5305-01-516-1181
High Torque Screw
This screw has 0.0312 in. Oversized shank dia..
Manufacturer part number LD111-0046-2506 for national stock number 5305015161181.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-516-1181.
-
MPN or Model
LD111-0046-2506
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.457 inches and 0.477 inches -
Fastener Length
Between 0.827 inches and 0.857 inches -
Head Style
Flat countersunk -
Head Diameter
0.578 inches -
Grip Diameter
Between 0.3427 inches and 0.3432 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B1-b acft -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-030-4872 MPN 66-24009Rudder Rib
- 1560-00-185-1623 MPN 151-14029Hoist Fitting Plug
- 1680-00-341-6668 MPN 223-52613-7Flap Control Cable
- 1560-00-732-9830 MPN 265-170009-5Aircraft Structural Component Bracket
- 1560-01-133-8802 MPN 60B91575Bracket Tie Down Clip
- 1560-01-163-6816 MPN L5340270-009Aircraft Structural Component Support
- 4920-01-178-9129 MPN R-TBD-1016Selector Valve Mounting Fixture
- 1680-01-199-5223 MPN L5248013-003Cylinder Housing Union
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-516-1181 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0046-2506 | Boeing Company, The |
LD111-0046 | Boeing Company, The |