NSN 5305-01-518-6741
Bolt Stove
1.812 inches fastener length, fillister head style, between 0.166 inches and 0.183 inches head diameter, head height: between 0.094 inches and 0.107 inches .
Manufacturer part number S8805SA4-29 for national stock number 5305015186741.
Datasheet
-
Product description
Machine Screw NSN 5305-01-518-6741.
-
MPN or Model
S8805SA4-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.812 inches -
Fastener Length
1.812 inches -
Head Style
Fillister -
Head Diameter
Between 0.166 inches and 0.183 inches -
Head Height
Between 0.094 inches and 0.107 inches -
Hole Diameter
0.037 inches -
Internal Drive Style
Slot -
End Application
Hawkeye e-2c carrier -
Thread Diameter
0.112 inches -
Hole Quantity
1 -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Screw Material
Steel comp 8630 -
Screw Material Specification
Mil-s-6050 military specification single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, class c federal specification single treatment response -
Head Hole Configuration Style
Round -
Thread Series Designator
Unc
More from these suppliers
- 1680-00-008-9408 MPN 531421-9Gearbox Pump Plug
- 5930-00-063-2002 MPN 547470Thermostatic Switch
- 5935-00-269-2992 MPN 668-005-9006Tip Jack
- 4920-00-350-7107 MPN 274050-1-1Aircraft Maintenance Fixture
- 5950-00-461-0551 MPN 733-463-9001Power Autotransformer Transformer
- 5950-00-559-1248 MPN 422-012-9001Reactor
- 1680-01-052-6712 MPN 2045423-1Follower Shaft Assembly
- 1680-01-125-8655 MPN 2040905-1Locating Ring
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-518-6741 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S8805SA4-29 | Honeywell International Inc. |
Stock Check
- NE: 487