NSN 5305-01-519-4611
High Torque Screw
1.120 inches fastener length, flat countersunk head style, between 0.323 inches and 0.334 inches head diameter, grip diameter: between 0.161 inches and 0.164 inches .
Manufacturer part number NAS517-2-19 for national stock number 5305015194611.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-519-4611.
-
MPN or Model
NAS517-2-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.594 inches -
Fastener Length
1.120 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.323 inches and 0.334 inches -
Grip Diameter
Between 0.161 inches and 0.164 inches -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.164 inches -
Grip Length
1.188 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Steel comp 4130 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal standard single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-622-5559 MPN NAS1063A5-199RBTerminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-008-9113 MPN NAS1190E02T4LSocket Head Cap Screw
- 5305-00-052-6914 MPN MS24629-34Tapping Screw
- 5305-00-054-9234 MPN MS24694C122Machine Screw
- 5305-00-058-2069 MPN MS24677-11Socket Head Cap Screw
- 5305-00-067-3863 MPN NAS1189-3P7LSocket Head Cap Screw
- 5305-00-068-5401 MPN MS16996-1Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-519-4611 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS517-2-19 | National Aerospace Standards |