NSN 5305-01-519-9206
High Torque Screw
Between 1.797 inches and 1.827 inches fastener length, fillister head style, between 0.429 inches and 0.479 inches head diameter, head height: 0.071 inches .
Manufacturer part number AIC618-5-29 for national stock number 5305015199206.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-519-9206.
-
MPN or Model
AIC618-5-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.797 inches and 1.827 inches -
Head Style
Fillister -
Head Diameter
Between 0.429 inches and 0.479 inches -
Head Height
0.071 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16 acft -
Thread Diameter
0.312 inches -
Grip Length
Between 1.296 inches and 1.326 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Part Name Assigned By Controlling Agency
Screw-low hd, skirt hd -
Material
Steel comp h11 fastener -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-150-3362 MPN AIC4533-7-1Shoulder Screw
- 5305-00-331-4778 MPN 965812-309CMachine Screw
- 5305-00-347-7853 MPN LS15265V3-18Close Tolerance Screw
- 5305-00-505-2744 MPN AIC1186-508Close Tolerance Screw
- 5305-00-524-3959 MPN 7S14-1032-24AMachine Screw
- 5305-01-050-9001 MPN AIC984-3-9Close Tolerance Screw
- 5305-01-200-1433 MPN BACB30VF4K14Close Tolerance Screw
- 5305-01-268-0910 MPN BACB30LU4D15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-519-9206 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |
AIC618-5-29 | Sps Technologies, Llc |