NSN 5305-01-520-3841
High Torque Screw
Between 1.937 inches and 1.984 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT181-6-21 for national stock number 5305015203841.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-3841.
-
MPN or Model
HT181-6-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.641 inches -
Fastener Length
Between 1.937 inches and 1.984 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Point Length
0.060 inches -
Point Style
Flat -
Internal Drive Style
High-torque -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
15550 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Nas98 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 federal standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-017-5131 MPN HT3N-6Close Tolerance Screw
- 5305-00-261-4291 MPN NAS1102-04-22Machine Screw
- 5305-00-420-8249 MPN NAS1133V26Close Tolerance Screw
- 5305-00-434-1326 MPN NAS1101-3H16Machine Screw
- 5305-00-450-5991 MPN NAS1122C1HClose Tolerance Screw
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-00-802-4689 MPN HT4M-9Close Tolerance Screw
- 5305-00-916-4618 MPN HR101H4-15Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-3841 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT181-6-21 | Hi-shear Corporation |
HT181-6-21 | Lisi Aerospace Canada Corp |
HT618-6-21 | Hi-shear Corporation |