NSN 5305-01-520-4446
High Torque Screw
Between 1.235 inches and 1.265 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number AIC618-5-20 for national stock number 5305015204446.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-4446.
-
MPN or Model
AIC618-5-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.235 inches and 1.265 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16 acft -
Thread Diameter
0.312 inches -
Grip Length
Between 0.734 inches and 0.764 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
90.0 degrees -
Part Name Assigned By Controlling Agency
Screw-low hd, skirt hd -
Material
Steel comp h11 -
Material Specification
Cda000 assn standard single material response -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-231-7418 MPN 3M925C5-13DClose Tolerance Screw
- 5305-01-349-4193 MPN VCL0009-5-14Close Tolerance Screw
- 5305-01-435-3022 MPN BACB30LU6-22Close Tolerance Screw
- 5305-01-435-6614 MPN BACB30LU9-27Close Tolerance Screw
- 5305-01-477-5628 MPN ST3M652C7-15AClose Tolerance Screw
- 5305-01-512-8368 MPN 3M1170C4-4AClose Tolerance Screw
- 5306-00-962-6779 MPN 8140601-03Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-4446 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-5-20 | Sps Technologies, Llc |
93926-5-20 | Sps Technologies, Llc |
93926-5-20 | Sps Technologies, Llc |
VT10021-5-20 | Valley-todeco, Inc. |
SF116-5-20 | Jensen Rolf And Associates |
GS1009-5-20 | B & B Specialties Inc. |
C20645-5-20 | Lockheed Martin Corporation |