NSN 5305-01-520-4555
High Torque Screw
Between 1.385 inches and 1.432 inches fastener length, flat countersunk head style, between 0.280 inches and 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT184-3-18 for national stock number 5305015204555.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-4555.
-
MPN or Model
HT184-3-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.385 inches and 1.432 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-9112 MPN NAS1190E02T3LSocket Head Cap Screw
- 5305-00-204-5457 MPN BB302-6-8Machine Screw
- 5305-00-454-1151 MPN NAS1133V36Close Tolerance Screw
- 5305-00-814-6167 MPN NAS1204-62Close Tolerance Screw
- 5305-00-975-2119 MPN NAS1208-54DClose Tolerance Screw
- 5305-01-046-2080 MPN HT4010-6-7Shoulder Screw
- 5305-01-129-7599 MPN HT295-7-16Close Tolerance Screw
- 5305-01-141-7190 MPN HT4049-6D14XShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-4555 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT184-3-18 | Hi-shear Corporation |
HT184-3-18 | Lisi Aerospace Canada Corp |