NSN 5305-01-520-4558
High Torque Screw
Between 0.5725 inches and 0.6195 inches fastener length, flat countersunk head style, between 0.280 inches and 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT184-3-5 for national stock number 5305015204558.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-4558.
-
MPN or Model
HT184-3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.5725 inches and 0.6195 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-120-1651 MPN HT111AR3-6Close Tolerance Screw
- 5305-00-235-0393 MPN NAS1101E02-6Machine Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-00-680-5428 MPN NAS1203-46Close Tolerance Screw
- 5305-00-680-5428 MPN NAS1203-46Close Tolerance Screw
- 5305-00-680-6013 MPN HT4M-20Close Tolerance Screw
- 5305-00-891-1722 MPN HT195-3-5Close Tolerance Screw
- 5305-00-916-4614 MPN HR101H6-25Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-4558 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT184-3-5 | Hi-shear Corporation |
HT184-3-5 | Lisi Aerospace Canada Corp |