NSN 5305-01-520-4559
High Torque Screw
Between 1.765 inches and 1.812 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT181-4-21 for national stock number 5305015204559.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-4559.
-
MPN or Model
HT181-4-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.765 inches and 1.812 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Point Length
0.060 inches -
Point Style
Flat -
Internal Drive Style
High-torque -
Thread Diameter
0.2500 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
6400 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Nas98 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 federal standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-173-8104 MPN HT184-4-9Close Tolerance Screw
- 5305-00-323-2473 MPN 3MA585-14TClose Tolerance Screw
- 5305-00-838-5448 MPN NAS1101E08-3Machine Screw
- 5305-00-926-5707 MPN NAS1133C15Close Tolerance Screw
- 5305-00-957-5209 MPN HT7U17Machine Screw
- 5305-01-158-6248 MPN ST3M455-9DL45Close Tolerance Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-195-7919 MPN LE111-0034-2305Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-4559 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT181-4-21 | Hi-shear Corporation |
HT181-4-21 | Lisi Aerospace Canada Corp |