NSN 5305-01-520-9381
High Torque Screw
0.859 inches fastener length, undercut pan no. 2 head style, 0.482 inches head diameter, head height: 0.168 inches .
Manufacturer part number NAS5314P6 for national stock number 5305015209381.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-9381.
-
MPN or Model
NAS5314P6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.298 inches -
Fastener Length
0.859 inches -
Head Style
Undercut pan no. 2 -
Head Diameter
0.482 inches -
Head Height
0.168 inches -
Spline Major Diameter
0.221 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Torx -
End Application
Mv-22 (v-22 lrip1) -
Thread Diameter
0.250 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
5820 pounds per square inch -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu -
Material
Iron alloy 660 -
Material Specification
Ams 5731 federal specification 1st material response or ams 5732 federal specification 2nd material response or ams 5737 federal specification 3rd material response or ams 5853 federal specification 4th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-093-6382 MPN NAS1650R22B41SNElectrical Receptacle Connector
- 5940-01-384-5052 MPN NAS1063A20TB42BTerminal Board Marker Strip
- 5305-00-058-4102 MPN NAS1081-3B4Setscrew
- 5305-00-059-8515 MPN NAS1351-04-4Socket Head Cap Screw
- 5305-00-086-2464 MPN NAS1203-15Close Tolerance Screw
- 5305-00-108-9804 MPN NAS1351-5LE16Socket Head Cap Screw
- 5305-00-144-3959 MPN MS24693-38Machine Screw
- 5305-00-177-5321 MPN NAS1352C4LN28Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-9381 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5314P6 | National Aerospace Standards |
120-259E4P6 | Bell Helicopter Textron Inc. |
NAS5314E4P6 | Bell Helicopter Textron Inc. |