NSN 5305-01-520-9385
High Torque Screw
0.528 inches fastener length, undercut pan no. 2 head style, 0.547 inches head diameter, head height: 0.127 inches .
Manufacturer part number 120-259V3A2 for national stock number 5305015209385.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-9385.
-
MPN or Model
120-259V3A2
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.260 inches -
Fastener Length
0.528 inches -
Head Style
Undercut pan no. 2 -
Head Diameter
0.547 inches -
Head Height
0.127 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
0.189 inches -
Internal Drive Style
Torx -
End Application
Mv-22 (v-22 lrip1) -
Thread Diameter
0.190 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu -
Material
Titanium alloy uns r54520 -
Material Specification
Ams 4928 federal specification 1st material response or ams 4967 federal specification 2nd material response -
Surface Treatment
Paint and lubricant -
Surface Treatment Specification
Nas4006 assn standard 1st treatment response and cetyl alcohol lubricant per mil-l-87132, type 3, grade b military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-066-9543 MPN 204-061-714-3Remote Control Lever
- 1560-00-106-8633 MPN 205-031-179-052Aircraft Structural Panel
- 1560-00-120-0837 MPN 204-030-163-41Beam Assembly Stiffener
- 1680-00-128-6731 MPN 205-030-627-13C Support Stanchion
- 1560-00-129-6286 MPN 110-072Glare Shield Bumper
- 4820-00-176-4621 MPN 205-062-668-001Safety Relief Valve
- 5940-00-413-1425 MPN 31-034-2-14Terminal Block Tape
- 1560-00-413-1492 MPN 205-030-477-11Bushing
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-9385 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-259V3A2 | Bell Helicopter Textron Inc. |