NSN 5305-01-520-9395
High Torque Screw
This screw is intended for applications which require the six lobe recess; has undrilled shank.
Manufacturer part number 120-265E3P10 for national stock number 5305015209395.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-9395.
-
MPN or Model
120-265E3P10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.260 inches -
Fastener Length
0.901 inches -
Head Style
Flat countersunk -
Head Diameter
0.380 inches -
Spline Major Diameter
0.189 inches -
Grip Diameter
0.163 inches -
Internal Drive Style
Torx -
End Application
Mv-22 aircraft (v-22 lrip 1 e-nsn isil) -
Thread Diameter
0.190 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Screw, shear, flat 100 degrees head, close tolerance, short thread, six lobe recess, 95 ksi fsu -
Material
Iron alloy 660 -
Material Specification
Ams5731 federal specification 1st material response or ams5732 federal specification 2nd material response or ams5737 federal specification 3rd material response or ams5853 federal specification 4th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-150-3263 MPN AIC83-4A11Close Tolerance Screw
- 5305-00-786-7559 MPN 51B334-2Machine Screw
- 5305-00-984-6858 MPN AIC1182-103Socket Head Cap Screw
- 5305-01-063-8483 MPN NAS1101-3-27Machine Screw
- 5305-01-104-1468 MPN HT4067-3-5DClose Tolerance Screw
- 5305-01-188-7592 MPN LE111-0038-2408Close Tolerance Screw
- 5305-01-329-9953 MPN AIC4414-3-17Machine Screw
- 5305-01-513-8789 MPN TX1026D5-8AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-9395 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-265E3P10 | Bell Helicopter Textron Inc. |
120-265E3P10 | Arconic Global Fasteners & Rings, |
120-265E3P10 | Sps Technologies, Llc |
120-265E3P10 | Saturn Fasteners Inc |
120-265E3P10 | Heartland Precision Fasteners, Inc. |
120-265E3P10 | B & B Specialties Inc. |
120-265E3P10 | Sps Technologies, Llc |
120-265E3P10 | Sps Technologies, Llc |
120-265E3P10 | B & B Specialties, Inc |
120-265E3P10 | Lfc Industries Inc. |
120-265E3P10 | Sps Technologies, Llc |