NSN 5305-01-521-2025
High Torque Screw
0.901 inches fastener length, flat fillister head style, between 0.306 inches and 0.313 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123-10B for national stock number 5305015212025.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-521-2025.
-
MPN or Model
NAS1123-10B
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.901 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.306 inches and 0.313 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1123 professional/industrial association standard
More from these suppliers
- 5935-00-687-0853 MPN NAS714-11Electrical Receptacle Connector
- 5305-00-020-0397 MPN MS27039-4-33Machine Screw
- 5305-00-058-2065 MPN MS24618-11Tapping Screw
- 5305-00-161-0676 MPN NAS1081C04A6LSetscrew
- 5305-00-196-4336 MPN NAS1100E04-5Machine Screw
- 5305-00-226-7925 MPN MS35191-312Machine Screw
- 5305-00-273-6267 MPN MS24677-101Socket Head Cap Screw
- 5305-00-281-8121 MPN NAS1581F3H10TClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-521-2025 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123-10B | National Aerospace Standards |