NSN 5305-01-521-2930
High Torque Screw
Between 1.098 inches and 1.128 inches fastener length, flat countersunk head style, between 0.257 inches and 0.304 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS1581C3T12 for national stock number 5305015212930.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-521-2930.
-
MPN or Model
NAS1581C3T12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.098 inches and 1.128 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.257 inches and 0.304 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5935-01-443-8103 MPN NAS1692G10T5PNElectrical Receptacle Connector
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-007-9880 MPN NAS1100E04-5PMachine Screw
- 5305-00-008-7864 MPN NAS1631C2Machine Screw
- 5305-00-057-0476 MPN MS24694C111Machine Screw
- 5305-00-141-6407 MPN NAS1191E02P5LKSocket Head Cap Screw
- 5305-00-206-3702 MPN NAS517-3-1Machine Screw
- 5305-00-225-9092 MPN MS90726-37Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-521-2930 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3T12 | National Aerospace Standards |
NAS1581C3T12 | National Aerospace Standards |
NAS1581C3T12 | National Aerospace Standards |
10369437 | Nimikkeistokeskus Ncb Finland |
NAS1581C3T12 | National Aerospace Standards |
10369437 | Nimikkeistokeskus Ncb Finland |