NSN 5305-01-521-5685
High Torque Screw
Between 1.407 inches and 1.437 inches fastener length, flat countersunk head style, 0.951 inches head diameter, grip diameter: between 0.498 inches and 0.499 inches .
Manufacturer part number NAS1790-8-11 for national stock number 5305015215685.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-521-5685.
-
MPN or Model
NAS1790-8-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 1.407 inches and 1.437 inches -
Head Style
Flat countersunk -
Head Diameter
0.951 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Internal Drive Style
High-torque -
End Application
B-52 acft -
Thread Diameter
0.500 inches -
Grip Length
Between 0.677 inches and 0.697 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Close tolerance screw -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-156-7196 MPN NASM77072Lug Terminal
- 5940-01-052-5105 MPN NAS1389-4Conductor Splice
- 5940-01-135-7077 MPN AS1745-3Conductor Splice
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5305-00-051-2332 MPN MS51958-101Machine Screw
- 5305-00-053-1114 MPN MS51861-15Tapping Screw
- 5305-00-165-8004 MPN MS3212-55Machine Screw
- 5305-00-174-0686 MPN NAS205-21Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-521-5685 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790-8-11 | National Aerospace Standards |
NAS1790-8-11 | The Boeing Company |