NSN 5305-01-521-7349
High Torque Screw
Between 1.329 inches and 1.359 inches fastener length, flat countersunk head style, 0.826 inches head diameter, grip diameter: 0.437 inches .
Manufacturer part number NAS587-11 for national stock number 5305015217349.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-521-7349.
-
MPN or Model
NAS587-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.656 inches -
Fastener Length
Between 1.329 inches and 1.359 inches -
Head Style
Flat countersunk -
Head Diameter
0.826 inches -
Grip Diameter
0.437 inches -
Internal Drive Style
High-torque -
End Application
1b-52 acft -
Thread Diameter
0.4375 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Close tolerance screw -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-376-5867 MPN NAS1063F-1-8Terminal Board Marker Strip
- 5940-01-425-7414 MPN NAS1063A14-425Terminal Board Marker Strip
- 5305-00-052-6920 MPN MS24629-56Tapping Screw
- 5305-00-052-6921 MPN MS24629-57Tapping Screw
- 5305-00-071-3220 MPN NAS517-6-46Machine Screw
- 5305-00-079-7360 MPN MS35307-388Hexagon Head Cap Screw
- 5305-00-104-5081 MPN NAS1352-7LE48PSocket Head Cap Screw
- 5305-00-160-0253 MPN MS51958-14BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-521-7349 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS587-11 | National Aerospace Standards |