NSN 5305-01-522-2116
High Torque Screw
Between 1.610 inches and 1.640 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1580-C4T-26 for national stock number 5305015222116.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-522-2116.
-
MPN or Model
NAS1580-C4T-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.610 inches and 1.640 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
T-38 acft -
Thread Diameter
0.250 inches -
Grip Length
Between 1.207 inches and 1.237 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, close tolerance -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-391-5970 MPN NAS1063A9-TB141CTerminal Board Marker Strip
- 5940-01-451-4892 MPN NAS1063A20-500AZTerminal Board Marker Strip
- 5305-00-145-0888 MPN MS27039B0806Machine Screw
- 5305-00-234-2349 MPN MS35307-537Hexagon Head Cap Screw
- 5305-00-253-5617 MPN MS21318-23Drive Screw
- 5305-00-269-3216 MPN MS90725-66Hexagon Head Cap Screw
- 5305-00-401-4974 MPN NAS1635-06LL10Socket Head Cap Screw
- 5305-00-432-8222 MPN MS51862-37Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-522-2116 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580-C4T-26 | National Aerospace Standards |