NSN 5305-01-524-0247
High Torque Screw
Between 0.455 inches and 0.485 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number BACB30LK4-2 for national stock number 5305015240247.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-524-0247.
-
MPN or Model
BACB30LK4-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.455 inches and 0.485 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
0.189 inches -
Internal Drive Style
Cross recess type iii -
End Application
1b-52 acft -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Part Name Assigned By Controlling Agency
Screw, machine -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-219-3685 MPN 9-38948-2Pilots Window Seal Assembly
- 5935-00-256-4461 MPN STBM27G-16Electrical Connector Potting Mold
- 5945-00-283-6553 MPN 10-1722-3Electromagnetic Relay
- 4920-00-343-7715 MPN TE65B17158Wing Tip Vent Plug
- 1680-00-348-6196 MPN 10-1106-2Aircraft Cable Tension Regulator
- 1560-00-455-3850 MPN 65-8890-227Nacelle Parts Kit
- 1560-00-571-1243 MPN 66-1166Elevator Control Fitting
- 1560-00-613-4034 MPN 90-2944-1Aircraft Access Cover
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-524-0247 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LK4-2 | The Boeing Company |