NSN 5305-01-524-1498
High Torque Screw
0.618 inches fastener length, round extended washer head style, 0.312 inches head diameter, head height: 0.087 inches .
Manufacturer part number 120-225-08-06 for national stock number 5305015241498.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-524-1498.
-
MPN or Model
120-225-08-06
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.398 inches -
Fastener Length
0.618 inches -
Head Style
Round extended washer -
Head Diameter
0.312 inches -
Head Height
0.087 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.025 inches -
Grip Diameter
0.163 inches -
Internal Drive Style
Cruciform ribbed -
End Application
Support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil) -
Thread Diameter
0.164 inches -
Grip Length
0.094 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
1425 pounds per square inch -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Screw, washer head, close tolerance, long thread, 95 ksi fsu -
Material
Steel comp 4340 -
Material Specification
Ams6415 assn standard 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-071-8278 MPN 204-031-280-7Aircraft Structural Panel
- 1560-00-122-1170 MPN 204-030-713-087Fuselage Doubler
- 1560-00-133-4140 MPN 204-070-159-001Heater Duct Assembly
- 1560-00-134-5182 MPN 205-030-711-029Bulkhead Support
- 1680-00-140-4270 MPN 212-001-126-5Bell Crank
- 1560-00-200-7815 MPN 204-012-105-001Static Stop Assembly
- 1560-00-249-3325 MPN 205-060-810-035Chafe Strip
- 1560-00-348-9802 MPN 47-322-208-1Frame Brace Fork
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-524-1498 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-225-08-06 | Bell Helicopter Textron Inc. |