NSN 5305-01-524-1506
High Torque Screw
1.243 inches fastener length, round extended washer head style, 0.312 inches head diameter, head height: 0.087 inches .
Manufacturer part number 120-225-08-18 for national stock number 5305015241506.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-524-1506.
-
MPN or Model
120-225-08-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.398 inches -
Fastener Length
1.243 inches -
Head Style
Round extended washer -
Head Diameter
0.312 inches -
Head Height
0.087 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.025 inches -
Grip Diameter
0.163 inches -
Internal Drive Style
Cruciform ribbed -
End Application
Support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil) -
Thread Diameter
0.164 inches -
Grip Length
0.719 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
1425 pounds per square inch -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Screw, washer head, close tolerance, long thread, 95 ksi fsu -
Material
Steel comp 4340 -
Material Specification
Ams6415 assn standard 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-131-6424 MPN 206-070-309-3Windshi Nozzle Assy
- 1560-00-133-7196 MPN 209-030-203-52Floor Frame
- 4820-00-135-7636 MPN 209-076-130-001Check Valve
- 5905-00-175-8508 MPN 110-054H821Composition Fixed Resistor
- 1560-00-176-1448 MPN 205-030-253-131Former
- 1560-00-181-4166 MPN 206-061-905-17Drive Shaft Cover
- 1560-00-251-3880 MPN 209-062-204-1Transtion Duct Assy
- 1560-00-252-8606 MPN 209-070-716-3Armor Panel
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-524-1506 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-225-08-18 | Bell Helicopter Textron Inc. |