NSN 5305-01-524-1529
High Torque Screw
0.618 inches fastener length, round extended washer head style, 0.312 inches head diameter, head height: 0.087 inches .
Manufacturer part number 120-225C08-06 for national stock number 5305015241529.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-524-1529.
-
MPN or Model
120-225C08-06
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.398 inches -
Fastener Length
0.618 inches -
Head Style
Round extended washer -
Head Diameter
0.312 inches -
Head Height
0.087 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.025 inches -
Grip Diameter
0.163 inches -
Internal Drive Style
Cruciform ribbed -
End Application
Support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil) -
Thread Diameter
0.164 inches -
Grip Length
0.094 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
1425 pounds per square inch -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Screw, washer head, close tolerance, long thread, 95 ksi fsu -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard 1st material response or ams5732 assn standard 2nd material response or ams5737 assn standard 3rd material response or ams5853 assn standard 4th material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-007-5914 MPN 209-062-771-1Flight Detent Lever Assembly
- 1680-00-044-2239 MPN 205-070-703-5Aircraft Seat
- 1560-00-176-2041 MPN 212-060-602-5Switch Support
- 1680-00-178-8456 MPN 206-001-707-1Bell Crank
- 1560-00-239-3804 MPN 205-060-909-027Firewall Assembly
- 1560-00-253-1735 MPN 206-062-220-1Duct Inlet
- 1560-00-413-1408 MPN 205-030-892-009Boom Access Door
- 1560-00-451-1142 MPN 204-031-083-1Boom Fitting
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-524-1529 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-225C08-06 | Bell Helicopter Textron Inc. |