NSN 5305-01-524-1531
High Torque Screw
1.625 inches fastener length, round extended washer head style, 0.375 inches head diameter, head height: 0.094 inches .
Manufacturer part number 120-225-3-24 for national stock number 5305015241531.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-524-1531.
-
MPN or Model
120-225-3-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.430 inches -
Fastener Length
1.625 inches -
Head Style
Round extended washer -
Head Diameter
0.375 inches -
Head Height
0.094 inches -
Extended Washer Diameter
0.437 inches -
Extended Washer Thickness
0.027 inches -
Grip Diameter
0.189 inches -
Internal Drive Style
Cruciform ribbed -
End Application
Support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil) -
Thread Diameter
0.190 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
2000 pounds per square inch -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Screw, washer head, close tolerance, long thread, 95 ksi fsu -
Material
Steel comp 4340 -
Material Specification
Ams6415 assn standard 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-125-2285 MPN 47-722-018-1Upper Bearin Spacer
- 1680-00-130-2455 MPN 205-070-778-1Leg Assembly
- 1560-00-222-9265 MPN 209-070-559-31Air Duct Insulation
- 1560-00-237-5503 MPN 209-030-840-23Vertica Spar Filler
- 1560-00-238-4777 MPN 204-030-063-3Pylon Su Panel Assy
- 4820-00-241-0634 MPN 209-062-607-1Check Valve
- 1560-00-246-4827 MPN 205-070-888-9Aircraft Access Cover
- 1560-00-400-2751 MPN 205-030-028-041Aircraft Access Door
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-524-1531 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-225-3-24 | Bell Helicopter Textron Inc. |