NSN 5305-01-524-1535
High Torque Screw
2.000 inches fastener length, round extended washer head style, 0.375 inches head diameter, head height: 0.094 inches .
Manufacturer part number 120-225-3-30 for national stock number 5305015241535.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-524-1535.
-
MPN or Model
120-225-3-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.429 inches -
Fastener Length
2.000 inches -
Head Style
Round extended washer -
Head Diameter
0.375 inches -
Head Height
0.094 inches -
Extended Washer Diameter
0.437 inches -
Extended Washer Thickness
0.027 inches -
Grip Diameter
0.189 inches -
Internal Drive Style
Cruciform ribbed -
End Application
Support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil) -
Thread Diameter
0.190 inches -
Grip Length
1.438 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
2000 pounds per square inch -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Screw, washer head, close tolerance, long thread, 95 ksi fsu -
Material
Steel comp 4340 -
Material Specification
Ams6415 assn standard 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-462-2737 MPN 3M1169V5-11AClose Tolerance Screw
- 5305-01-617-3828 MPN 120-225-08-12Close Tolerance Screw
- 5306-01-631-8814 MPN JSFB10-3-11Internal Wrenching Bolt
- 5306-01-646-1511 MPN JSFB17-14N40PClose Tolerance Bolt
- 5306-01-646-1531 MPN JSFB17-5N20PClose Tolerance Bolt
- 1560-00-070-1172 MPN 209-030-263-35Fuel Cell Cavity Filler
- 1560-00-122-5364 MPN 204-031-321-047Forward Fuselage Floor Stiffener
- 1560-00-133-7463 MPN 206-062-223-1Bleed Boot Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-524-1535 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-225-3-30 | Pilgrim Screw Corporation |
120-225-3-30 | Bell Helicopter Textron Inc. |
120-225-3-30 | Saturn Fasteners Inc |