NSN 5305-01-524-1551
High Torque Screw
0.550 inches fastener length, flat countersunk head style, 0.508 inches head diameter, grip diameter: 0.625 inches .
Manufacturer part number NAS7204U2 for national stock number 5305015241551.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-524-1551.
-
MPN or Model
NAS7204U2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
0.550 inches -
Head Style
Flat countersunk -
Head Diameter
0.508 inches -
Grip Diameter
0.625 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
Ams5731 assn standard 1st material response or ams5737 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-0287 MPN NAS1131E88PClose Tolerance Screw
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-008-9112 MPN NAS1190C02T3LSocket Head Cap Screw
- 5305-00-051-2334 MPN MS51958-108Machine Screw
- 5305-00-067-5156 MPN MS21295-30Socket Head Cap Screw
- 5305-00-071-2101 MPN MS51958-86Machine Screw
- 5305-00-224-0565 MPN NAS1101-02-10Machine Screw
- 5305-00-269-4212 MPN MS24694S154Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-524-1551 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7204U2 | National Aerospace Standards |