NSN 5305-01-525-0806
High Torque Screw
Between 0.370 inches and 0.390 inches fastener length, flat countersunk undercut head style, 0.226 inches head diameter, head height: 0.039 inches .
Manufacturer part number NAS8602-1 for national stock number 5305015250806.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-525-0806.
-
MPN or Model
NAS8602-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.370 inches and 0.390 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.226 inches -
Head Height
0.039 inches -
Grip Diameter
Between 0.162 inches and 0.163 inches -
Internal Drive Style
Cross recess type 1 -
End Application
C17 acft -
Thread Diameter
0.164 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw close tolerance -
Material
Steel comp 4340 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5975-00-255-2428 MPN MS3368-4-CDElectrical Components Tiedown Strap
- 5940-01-391-1828 MPN NAS1063B46-50Terminal Board Marker Strip
- 5940-01-425-7390 MPN NAS1063C8-338Terminal Board Marker Strip
- 5305-00-024-5810 MPN MS21090-0833Socket Head Cap Screw
- 5305-00-051-2324 MPN MS51958-92Machine Screw
- 5305-00-058-9362 MPN MS51977-19Setscrew
- 5305-00-083-4614 MPN NAS1581C3H5PClose Tolerance Screw
- 5305-00-143-9689 MPN NAS1146-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-525-0806 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8602-1 | National Aerospace Standards |