NSN 5305-01-525-3775
High Torque Screw
1.527 inches fastener length, flush head style, between 0.805 inches and 0.825 inches head diameter, head height: 0.195 inches .
Manufacturer part number AIC9535-7-10 for national stock number 5305015253775.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-525-3775.
-
MPN or Model
AIC9535-7-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.889 inches -
Fastener Length
1.527 inches -
Head Style
Flush -
Head Diameter
Between 0.805 inches and 0.825 inches -
Head Height
0.195 inches -
Grip Diameter
Between 0.437 inches and 0.438 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
18800 pounds per square inch -
Part Name Assigned By Controlling Agency
Special 100 deg. Flush head ms33781 recess, 132 ksi shear -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-7669 MPN AIC84C3-3Machine Screw
- 5305-01-054-6269 MPN AIC985-4-5Close Tolerance Screw
- 5305-01-105-1143 MPN 3M926-4L11Close Tolerance Screw
- 5305-01-159-4487 MPN 3M933-4-14Machine Screw
- 5305-01-176-7382 MPN HT4025L3-12Close Tolerance Screw
- 5305-01-330-6349 MPN AIC1651-3-13Close Tolerance Screw
- 5305-01-357-6327 MPN AIC4414-04-11Machine Screw
- 5305-01-417-6446 MPN AIC1198-08-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-525-3775 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC9535-7-10 | Sps Technologies, Llc |