NSN 5305-01-525-4664
High Torque Screw
Between 1.401 inches and 1.421 inches fastener length, flat countersunk head style, between 0.444 inches and 0.464 inches head diameter, grip diameter: between 0.239 inches and 0.259 inches .
Manufacturer part number CA2193-4-14 for national stock number 5305015254664.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-525-4664.
-
MPN or Model
CA2193-4-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.526 inches and 0.546 inches -
Fastener Length
Between 1.401 inches and 1.421 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.444 inches and 0.464 inches -
Grip Diameter
Between 0.239 inches and 0.259 inches -
Internal Drive Style
Hexagon -
End Application
1b1-b acft -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Width Across Flats
Between 0.156 inches and 0.158 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Bolt 100 degree flush -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-333-0039 MPN CA30074-1080Panel Screw Assembly
- 5305-01-504-3420 MPN CA28106C08-8HSPanel Screw Assembly
- 5306-01-576-9802 MPN CA21037-6-10HSInternal Wrenching Bolt
- 1560-00-073-6967 MPN 285-588000-3Line Assembly
- 1560-00-197-9445 MPN 134-31918Lower Mount Nut Assembly
- 1680-00-694-7224 MPN 180-524110Rudder Control Plug
- 1560-00-960-0644 MPN 265-210417-11Aircraft Structural Component Support
- 5985-01-117-4054 MPN 170-74082Waveguide Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-525-4664 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2193-4-14 | Arconic Global Fasteners & Rings, |
LE111-0002-4014 | Arconic Global Fasteners & Rings, |
LE111-0002-4014 | Fastener Innovation Technology, Inc. |
LE111-0002-4014 | Boeing Company, The |