NSN 5305-01-525-9344
High Torque Screw
Between 0.768 inches and 0.798 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, locking feature: patch locking feature.
Manufacturer part number BACB30LH3P7 for national stock number 5305015259344.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-525-9344.
-
MPN or Model
BACB30LH3P7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.768 inches and 0.798 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Locking Feature
Patch locking feature -
Grip Diameter
0.190 inches -
Single Shear Strength
95 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii. Class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-240-5184 MPN 3M925C3-19AClose Tolerance Screw
- 5305-01-435-5757 MPN BACB30LU8-27Close Tolerance Screw
- 5305-01-575-2859 MPN BACB30PF3-39Shoulder Screw
- 5306-00-990-6918 MPN VFK100G-05008Shear Bolt
- 5306-01-049-2996 MPN BACB30NF4H30Close Tolerance Bolt
- 5306-01-188-7584 MPN VFK600-7-17Shear Bolt
- 5306-01-202-8972 MPN LD111-0021-0706Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-525-9344 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3P7 | The Boeing Company |
BACB30LH3P7 | Huck International, Inc. |
BACB30LH3P7 | Federal Manufacturing Corporation |
BACB30LH3P7 | Arconic Global Fasteners & Rings, |
BACB30LH3P7 | Sps Technologies, Llc |
BACB30LH3P7 | Valley-todeco, Inc. |
BACB30LH3P7 | Sps Technologies, Llc |
BACB30LH3P7 | Arconic Global Fasteners & Rings, |
BACB30LH3P7 | Sps Technologies, Llc |