NSN 5305-01-526-4053
High Torque Screw
Tapped hole in head, 0.138-32, unjc-3b threads. Distance from top of head to injection port is 0.510 inches. Injection port is 0.120l x 0.060w..
Manufacturer part number 3M1034C4-11-51 for national stock number 5305015264053.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-526-4053.
-
MPN or Model
3M1034C4-11-51
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.157 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
0.249 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Screw-close tolerance, 100 degree countersunk, dovetail slot, sealant injection -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-462-2863 MPN 3M1170V5-8AClose Tolerance Screw
- 5305-01-496-1418 MPN TX1024C5D16-5AClose Tolerance Screw
- 5305-01-512-8414 MPN 3M1170D3-7AFClose Tolerance Screw
- 5306-00-071-2148 MPN VAL21013-12108Machine Bolt
- 5306-00-950-3313 MPN 3004M63P1Shoulder Bolt
- 5306-01-009-6694 MPN VEP220121-3F22Shear Bolt
- 5306-01-046-1191 MPN VAL23608-5-4Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-526-4053 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1034C4-11-51 | Boeing Company, The |
HT4075D4-11-51 | Arconic Global Fasteners & Rings, |
WC4075C4-11-51 | West Coast Aerospace Inc |
HT4075D4-11-51 | Hi-shear Corporation |
HT4075D4-11-51 | Lisi Aerospace Canada Corp |
HT4075D4-11-51 | Sps Technologies Inc |
3M1034C4-11-51 | Valley-todeco, Inc. |
HT4075D4-11-51 | Sps Technologies, Llc |
3M1034C4-11-51 | Heartland Precision Fasteners, Inc. |
HT4075D4-11-51 | Huck International, Inc. |
HT4075D4-11-51 | Sps Technologies, Llc |
HT4075D4-11-51 | Sps Technologies, Llc |
3M1034C4-11-51 | Fastener Innovation Technology, Inc. |
11839C4-11-51 | Reid Products Inc. |
HT4075D4-11-51 | Sps Technologies, Llc |
HT4075D4-11-51 | Alcoa Global Fasteners, Inc. |
3M1034C4-11-51 | Houston Precision Fasteners I, Lp |