NSN 5305-01-526-4138
High Torque Screw
Between 2.136 inches and 2.166 inches fastener length, pan head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.087 inches and 0.097 inches .
Manufacturer part number NAS7701-30 for national stock number 5305015264138.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-526-4138.
-
MPN or Model
NAS7701-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 2.136 inches and 2.166 inches -
Head Style
Pan -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
Grip Diameter
Between 0.136 inches and 0.137 inches -
Internal Drive Style
Cross recess type 1 -
End Application
C-17 acft -
Thread Diameter
0.138 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
32 -
Part Name Assigned By Controlling Agency
Screw close tolerance -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-435-3634 MPN NAS1063C2-21FTerminal Board Marker Strip
- 5305-00-007-1559 MPN NAS1100E04-16PMachine Screw
- 5305-00-007-1566 MPN NAS1743C4T10USocket Head Cap Screw
- 5305-00-008-9058 MPN NAS1102C04-3PMachine Screw
- 5305-00-052-6914 MPN MS24629-34Tapping Screw
- 5305-00-053-8967 MPN NAS1352C08-4Socket Head Cap Screw
- 5305-00-054-5667 MPN NAS583-34Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-526-4138 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7701-30 | National Aerospace Standards |