NSN 5305-01-526-6484
High Torque Screw
Between 1.638 inches and 1.668 inches fastener length, flat countersunk head style, 0.464 inches head diameter, grip diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number NAS1580V4R20 for national stock number 5305015266484.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-526-6484.
-
MPN or Model
NAS1580V4R20
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.638 inches and 1.668 inches -
Head Style
Flat countersunk -
Head Diameter
0.464 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
1b1-b acft -
Thread Diameter
0.250 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-1563 MPN NAS1100E06-6PMachine Screw
- 5305-00-007-6198 MPN NAS1631C26PMachine Screw
- 5305-00-008-9055 MPN NAS1298-5-18Shoulder Screw
- 5305-00-021-7101 MPN MS21295-41Socket Head Cap Screw
- 5305-00-051-2355 MPN NAS514P832-28Machine Screw
- 5305-00-053-8082 MPN MS24677-113Socket Head Cap Screw
- 5305-00-063-3028 MPN NAS1154-8Close Tolerance Screw
- 5305-00-089-0269 MPN NAS608-440-6PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-526-6484 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V4R20 | National Aerospace Standards |