NSN 5305-01-527-8146
High Torque Screw
Between 1.700 inches and 1.730 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1578V4H21 for national stock number 5305015278146.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-527-8146.
-
MPN or Model
NAS1578V4H21
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.398 inches and 0.408 inches -
Fastener Length
Between 1.700 inches and 1.730 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, flat pan head -
Material
Titanium alloy uns r56400 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-779-8222 MPN NAS1196-13Electrical Connector Shell
- 5905-01-174-8472 MPN RWR81S34R8FPInductive Wire Wound Fixed Resistor
- 5935-01-669-1857 MPN 31Electrical Plug Connector
- 5305-00-007-9881 MPN NAS1100E04-7PMachine Screw
- 5305-00-009-7703 MPN NAS1218-06E1Machine Screw
- 5305-00-071-2221 MPN MS35199-52Machine Screw
- 5305-00-078-5665 MPN MS35199-26Machine Screw
- 5305-00-225-9450 MPN MS16995-70Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-527-8146 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578V4H21 | National Aerospace Standards |