NSN 5305-01-528-0793
High Torque Screw
1.878 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1204-25D for national stock number 5305015280793.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-528-0793.
-
MPN or Model
NAS1204-25D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
1.878 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
1.562 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Nas498 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-990-1658 MPN NAS705C2Stud Terminal
- 5940-01-498-1857 MPN NAS1063D-1-3Terminal Board Marker Strip
- 1560-01-623-1804 MPN 520-14948-2Aircraft Stringer
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-008-9117 MPN NAS1190C04T4LSocket Head Cap Screw
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
- 5305-00-057-0522 MPN MS51958-26Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-528-0793 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1204-25D | National Aerospace Standards |