NSN 5305-01-528-1072
High Torque Screw
Between 1.798 inches and 1.828 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: 0.312 inches .
Manufacturer part number NAS1580V5H21 for national stock number 5305015281072.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-528-1072.
-
MPN or Model
NAS1580V5H21
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.798 inches and 1.828 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
0.312 inches -
Point Length
0.060 inches -
Point Style
Flat -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
1.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
9260 pounds per square inch -
Countersink Angle
100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-502-4359 MPN NAS1666-12Electrical Connector Cable Clamp
- 5940-01-058-8888 MPN NAS1744-5Conductor Splice
- 5940-01-547-0035 MPN NAS1389-2Conductor Splice
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-004-3129 MPN NAS1190E04P15LSocket Head Cap Screw
- 5305-00-057-0483 MPN MS24694C127Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
- 5305-00-083-4614 MPN NAS1581C3H5PClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-528-1072 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V5H21 | National Aerospace Standards |