NSN 5305-01-528-1074
High Torque Screw
Between 1.424 inches and 1.454 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: 0.312 inches .
Manufacturer part number NAS1580V5H15 for national stock number 5305015281074.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-528-1074.
-
MPN or Model
NAS1580V5H15
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.424 inches and 1.454 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
0.312 inches -
Point Length
0.060 inches -
Point Style
Flat -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
9260 pounds per square inch -
Countersink Angle
100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Material
Titanium alloy -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-228-4291 MPN NAS1744-8Conductor Splice
- 5940-00-549-8877 MPN NAS45-6-14CTerminal Board
- 5935-01-063-4525 MPN NAS1668-1Electrical Connector End Seal Plug
- 5940-01-391-2605 MPN NAS1063A2-TB107BTTerminal Board Marker Strip
- 5305-00-007-9893 MPN NAS1102E04-13Machine Screw
- 5305-00-007-9894 MPN NAS1102E04-10PMachine Screw
- 5305-00-058-1538 MPN NAS662C0LL2Socket Head Cap Screw
- 5305-00-071-2229 MPN MS90725-22Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-528-1074 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V5H15 | National Aerospace Standards |