NSN 5305-01-528-1077
High Torque Screw
Between 1.361 inches and 1.391 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: 0.312 inches .
Manufacturer part number NAS1580V5H14 for national stock number 5305015281077.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-528-1077.
-
MPN or Model
NAS1580V5H14
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.361 inches and 1.391 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
0.312 inches -
Point Length
0.060 inches -
Point Style
Flat -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
9260 pounds per square inch -
Countersink Angle
100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Material
Titanium alloy -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-007-6173 MPN NAS1100E00-6Machine Screw
- 5305-00-057-0539 MPN NASM51958Machine Screw
- 5305-00-069-5572 MPN MS90725-84Hexagon Head Cap Screw
- 5305-00-174-8753 MPN MS16996-2BSocket Head Cap Screw
- 5305-00-288-2078 MPN NAS1604-28Shoulder Screw
- 5305-00-411-4439 MPN MS51958-116Machine Screw
- 5305-00-456-3083 MPN NAS1622-5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-528-1077 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V5H14 | National Aerospace Standards |