NSN 5305-01-528-1090
High Torque Screw
Between 2.128 inches and 2.158 inches fastener length, flat countersunk head style, between 0.951 inches and 1.014 inches head diameter, grip diameter: 0.499 inches .
Manufacturer part number NAS1580V8T22 for national stock number 5305015281090.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-528-1090.
-
MPN or Model
NAS1580V8T22
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.743 inches and 0.793 inches -
Fastener Length
Between 2.128 inches and 2.158 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.951 inches and 1.014 inches -
Grip Diameter
0.499 inches -
Point Length
0.080 inches -
Point Style
Flat -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
25600 pounds per square inch -
Countersink Angle
100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Material
Titanium alloy -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-375-3646 MPN NAS1063A8-4MLSTerminal Board Marker Strip
- 5940-01-391-1827 MPN NAS1063A4-TB138HTerminal Board Marker Strip
- 5940-01-207-0227 MPN NAS1745-20Conductor Splice
- 5305-00-055-6294 MPN NAS1352C04A4Socket Head Cap Screw
- 5305-00-081-6668 MPN MS24693S2Machine Screw
- 5305-00-144-0349 MPN NAS1133-1Close Tolerance Screw
- 5305-00-206-6599 MPN MS24678-24CSocket Head Cap Screw
- 5305-00-206-8152 MPN 35214-72Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-528-1090 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V8T22 | National Aerospace Standards |