NSN 5305-01-528-2543
High Torque Screw
2.050 inches fastener length, flat countersunk head style, between 0.826 inches and 0.888 inches head diameter, grip diameter: 0.438 inches .
Manufacturer part number NAS1580V7T22 for national stock number 5305015282543.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-528-2543.
-
MPN or Model
NAS1580V7T22
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.675 inches -
Fastener Length
2.050 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.826 inches and 0.888 inches -
Grip Diameter
0.438 inches -
Point Length
0.124 inches -
Point Style
Flat -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
19000 pounds per square inch -
Countersink Angle
100.0 degrees -
Point Chamfer Angle
45.0 degrees -
Material
Titanium alloy -
Material Specification
Ams 4967.Al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-268-2622 MPN NAS191-3Terminal Board
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-008-9117 MPN NAS1190E04T4LSocket Head Cap Screw
- 5305-00-167-3629 MPN AN525-416-6Machine Screw
- 5305-00-174-1149 MPN NAS334PA10Machine Screw
- 5305-00-175-9055 MPN NAS1351C06-8Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-528-2543 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V7T22 | National Aerospace Standards |