NSN 5305-01-528-2705
High Torque Screw
One hundred degree flush reduced head.
Manufacturer part number HT239-4-9 for national stock number 5305015282705.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-528-2705.
-
MPN or Model
HT239-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.190 inches -
Fastener Length
Between 0.300 inches and 0.347 inches -
Head Style
Flush -
Head Diameter
Between 0.363 inches and 0.394 inches -
Head Height
Between 0.237 inches and 0.284 inches -
Hole Diameter
Between 0.076 inches and 0.081 inches -
Grip Diameter
0.250 inches -
Shank Unthreaded Hole Diameter
0.076 inches locking feature and 0.081 inches locking feature -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.300 inches and 0.347 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Hole Configuration Style
Round -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.200 inches -
Part Name Assigned By Controlling Agency
Hi-torque bolt -
Material
Steel -
Material Specification
Mil-s-6758 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-151-5671 MPN NAS1204-29Close Tolerance Screw
- 5305-00-310-6408 MPN HT4028L6-9Close Tolerance Screw
- 5305-00-420-6449 MPN NAS1133V3Close Tolerance Screw
- 5305-00-464-2620 MPN NAS1012-14AHexagon Head Cap Screw
- 5305-00-567-6059 MPN NAS1189-04P7LKHSocket Head Cap Screw
- 5305-00-680-6013 MPN HT4M-20Close Tolerance Screw
- 5305-00-760-3823 MPN NAS1133-8Close Tolerance Screw
- 5305-00-842-7567 MPN HT195-6-9Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-528-2705 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239-4-9 | Hi-shear Corporation |
HT239-4-9 | Lisi Aerospace Canada Corp |
Stock Check
- NE: 24