NSN 5305-01-528-5467
High Torque Screw
1.250 inches fastener length, pan head style, between 0.594 inches and 0.615 inches head diameter, head height: between 0.203 inches and 0.218 inches .
Manufacturer part number NAS1135E14 for national stock number 5305015285467.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-528-5467.
-
MPN or Model
NAS1135E14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
1.250 inches -
Head Style
Pan -
Head Diameter
Between 0.594 inches and 0.615 inches -
Head Height
Between 0.203 inches and 0.218 inches -
Grip Diameter
0.310 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-152-7883 MPN NAS1190E06P7LElectrical Connector Shell
- 5940-01-449-7678 MPN NAS1063A12-N1001Terminal Board Marker Strip
- 1680-01-668-8056 MPN NAS355-5-170Aircraft Control Tube Assembly
- 5305-00-007-3025 MPN NAS1102C04-6PMachine Screw
- 5305-00-043-0442 MPN NAS662C2R12Machine Screw
- 5305-00-051-2334 MPN NASM51958Machine Screw
- 5305-00-059-8228 MPN MS35214-3Machine Screw
- 5305-00-068-6605 MPN MS24693-C6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-528-5467 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1135E14 | National Aerospace Standards |