NSN 5305-01-529-3701
High Torque Screw
This screw is intended for applications which require the six lobe recess; has undrilled shank.
Manufacturer part number NAS5315E08P3 for national stock number 5305015293701.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-529-3701.
-
MPN or Model
NAS5315E08P3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.260 inches -
Fastener Length
0.464 inches -
Head Style
Flat countersunk -
Head Diameter
0.332 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
0.163 inches -
Internal Drive Style
Torx -
End Application
Mv-22 aircraft (v-22 lrip 1 e-nsn isil) -
Thread Diameter
0.164 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
2240 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Screw, shear, flat 100 degrees head, close tolerance, short thread, six lobe recess, 95 ksi fsu; inavy: screw, shear -
Material
Iron alloy 660 -
Material Specification
Ams5731 federal specification 1st material response or ams5732 federal specification 2nd material response or ams5737 federal specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-486-2290 MPN C082-4-21Close Tolerance Screw
- 5305-00-505-2935 MPN LS15264V3-5Machine Screw
- 5305-01-012-5112 MPN AIC812-02-11Machine Screw
- 5305-01-054-4632 MPN BACB30773-3Close Tolerance Screw
- 5305-01-070-6441 MPN A1C812-3-10Machine Screw
- 5305-01-084-5394 MPN NAS1101E08-12Machine Screw
- 5305-01-090-6335 MPN BACB30LR3-17Close Tolerance Screw
- 5305-01-287-6289 MPN HT4068-4-17AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-529-3701 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5315E08P3 | Pilgrim Screw Corporation |
120-265E08P3 | Bell Helicopter Textron Inc. |
120-265E08P3 | Arconic Global Fasteners & Rings, |
120-265E08P3 | Sps Technologies, Llc |
120-265E08P3 | Saturn Fasteners Inc |
120-265E08P3 | Heartland Precision Fasteners, Inc. |
120-265E08P3 | B & B Specialties Inc. |
120-265E08P3 | Sps Technologies, Llc |
120-265E08P3 | Sps Technologies, Llc |
120-265E08P3 | B & B Specialties, Inc |
120-265E08P3 | Lfc Industries Inc. |
120-265E08P3 | Sps Technologies, Llc |
NAS5315E08P3 | National Aerospace Standards |